This robot generates gigabytes of CI logs every week. Here is an attempt to
search for "highlights", so it's easier to find actionable information
quickly. New ideas for what patterns to search for are very welcome.
"Current" shows only the most recent results from each submission. The
wider time ranges also show information about historical versions, which
may be useful for flapping tests, and also for hunting for bugs in master.
| 58/5970 |
Panic during xlog building with big values |
 |
Windows - Server 2022, MinGW64 - Meson |
| tap |
[15:28:40.625](301.399s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/051_effective_wal_level.pl line 281. |
| 57/6316 |
Add sanity check for duplicate enum values in GUC definitions |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
timed out waiting for match: (?^:Streaming transactions committing after ([A-F0-9]+/[A-F0-9]+), reading WAL from ([A-F0-... |
| 57/6172 |
NLS: use gettext() to translate system error messages |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[07:40:20.010](0.001s) not ok 4 - connecting to an invalid database: matches |
| 57/6359 |
Remove support for standard_conforming_strings = off |
|
FreeBSD - Meson |
| tap |
[06:06:03.755](242.444s) # poll_query_until timed out executing this query: |
| 57/6321 |
Support named (destination) portals in extended proto for psql meta commands. |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[05:48:50.812](302.409s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/035_standby_logical_decoding.pl line 871. |
| 57/5621 |
Compress big WAL records |
|
macOS - Sequoia - Meson |
| tap |
[05:14:26.153](990.885s) not ok 1 - Logical slot still valid |
|
Linux - Debian Trixie - Meson |
| tap |
[05:15:55.992](990.360s) not ok 1 - Logical slot still valid |
|
NetBSD - Meson |
| tap |
[05:07:19.590](997.032s) not ok 1 - Logical slot still valid |
|
OpenBSD - Meson |
| tap |
[04:55:17.120](0.580s) not ok 4 - pg_rewind --dry-run
[04:55:17.798](0.678s) not ok 5 - pg_rewind local
[04:55:18.293](0.001s) not ok 8 - table content: query result matches
[04:55:18.323](0.001s) not ok 11 - table content: query result matches
[04:55:18.384](0.001s) not ok 14 - truncation: query result matches
[04:55:18.468](0.001s) not ok 17 - tail-copy: query result matches
[04:55:18.529](0.061s) not ok 18 - drop: psql exit code
[04:55:18.531](0.001s) not ok 19 - drop: psql no stderr
[04:55:18.531](0.000s) not ok 20 - drop: query result matches
[04:55:24.114](5.165s) not ok 22 - pg_rewind remote
[04:55:24.116](0.001s) not ok 23 - recovery conf file sets dbname
[04:55:24.117](0.000s) not ok 24 - standby.signal created after pg_rewind
[04:55:24.482](0.000s) not ok 27 - table content: query result matches
[04:55:24.518](0.001s) not ok 30 - table content: query result matches
[04:55:24.930](0.013s) not ok 33 - truncation: query result matches
[04:55:25.018](0.000s) not ok 36 - tail-copy: query result matches
[04:55:25.041](0.023s) not ok 37 - drop: psql exit code
[04:55:25.043](0.001s) not ok 38 - drop: psql no stderr
[04:55:25.043](0.000s) not ok 39 - drop: query result matches
[04:55:31.603](6.079s) not ok 41 - pg_rewind archive
[04:55:32.109](0.000s) not ok 44 - table content: query result matches
[04:55:32.266](0.001s) not ok 47 - table content: query result matches
[04:55:32.582](0.001s) not ok 50 - truncation: query result matches
[04:55:32.676](0.003s) not ok 53 - tail-copy: query result matches
[04:55:32.749](0.059s) not ok 54 - drop: psql exit code
[04:55:32.750](0.000s) not ok 55 - drop: psql no stderr
[04:55:32.751](0.000s) not ok 56 - drop: query result matches |
| tap |
[04:55:21.945](8.868s) not ok 1 - pg_rewind local
[04:55:22.320](0.000s) not ok 4 - database names: query result matches
[04:55:37.997](15.095s) not ok 6 - pg_rewind remote
[04:55:37.999](0.001s) not ok 7 - recovery conf file sets dbname
[04:55:37.999](0.000s) not ok 8 - standby.signal created after pg_rewind
[04:55:38.240](0.000s) not ok 11 - database names: query result matches |
| tap |
[04:55:53.540](0.299s) not ok 33 - runs with start segment specified: exit code 0
[04:55:53.669](0.084s) not ok 38 - runs with start and end segment specified: exit code 0
[04:55:53.722](0.034s) not ok 43 - runs with path option and start and end locations: exit code 0
[04:55:53.822](0.002s) not ok 47 - falling off the end of the WAL results in an error: matches
[04:55:53.865](0.041s) not ok 48 - no output with --quiet option: exit code 0
[04:55:54.033](0.001s) not ok 52 - errors are shown with --quiet: matches
[04:55:54.106](0.070s) not ok 53 - runs with start segment and start LSN specified
[04:55:54.322](0.213s) not ok 55 - pg_waldump : runs ok
[04:55:54.652](0.262s) not ok 63 - pg_waldump --fullpage: runs ok
[04:55:54.654](0.001s) not ok 65 - pg_waldump --fullpage: some lines are output
[04:55:54.804](0.148s) not ok 67 - pg_waldump --stats: runs ok
[04:55:54.807](0.001s) not ok 69 - pg_waldump --stats: some lines are output
[04:55:54.810](0.003s) not ok 70 - statistics on stdout
[04:55:54.919](0.106s) not ok 72 - pg_waldump --stats=record: runs ok
[04:55:54.942](0.001s) not ok 74 - pg_waldump --stats=record: some lines are output
[04:55:54.961](0.016s) not ok 75 - statistics on stdout
[04:55:55.369](0.348s) not ok 77 - pg_waldump --rmgr Btree: runs ok
[04:55:55.497](0.086s) not ok 81 - pg_waldump --fork init: runs ok
[04:55:55.499](0.000s) not ok 83 - pg_waldump --fork init: some lines are output
[04:55:55.672](0.172s) not ok 85 - pg_waldump --relation 1663/5/16385: runs ok
[04:55:55.673](0.000s) not ok 87 - pg_waldump --relation 1663/5/16385: some lines are output
[04:55:55.714](0.040s) not ok 89 - pg_waldump --relation 1663/5/16391 --block 1: runs ok
[04:55:55.716](0.000s) not ok 91 - pg_waldump --relation 1663/5/16391 --block 1: some lines are output |
| tap |
[04:55:53.872](0.059s) not ok 2 - pg_waldump with --save-fullpage runs
[04:55:53.875](0.001s) not ok 3 - verify that at least one block has been saved |
| tap |
[05:09:22.475](987.078s) not ok 1 - Logical slot still valid |
|
Linux - Debian Trixie - Autoconf |
| tap |
[04:52:47.560](0.312s) not ok 4 - pg_rewind --dry-run
[04:52:48.698](1.138s) not ok 5 - pg_rewind local
[04:52:49.034](0.000s) not ok 8 - table content: query result matches
[04:52:49.113](0.000s) not ok 11 - table content: query result matches
[04:52:49.218](0.000s) not ok 14 - truncation: query result matches
[04:52:49.298](0.000s) not ok 17 - tail-copy: query result matches
[04:52:49.400](0.102s) not ok 18 - drop: psql exit code
[04:52:49.401](0.000s) not ok 19 - drop: psql no stderr
[04:52:49.401](0.000s) not ok 20 - drop: query result matches
[04:52:58.965](9.337s) not ok 22 - pg_rewind remote
[04:52:58.971](0.005s) not ok 23 - recovery conf file sets dbname
[04:52:58.972](0.000s) not ok 24 - standby.signal created after pg_rewind
[04:52:59.534](0.000s) not ok 27 - table content: query result matches
[04:52:59.644](0.000s) not ok 30 - table content: query result matches
[04:52:59.753](0.000s) not ok 33 - truncation: query result matches
[04:52:59.867](0.000s) not ok 36 - tail-copy: query result matches
[04:52:59.948](0.080s) not ok 37 - drop: psql exit code
[04:52:59.952](0.000s) not ok 38 - drop: psql no stderr
[04:52:59.958](0.000s) not ok 39 - drop: query result matches
[04:53:04.432](4.131s) not ok 41 - pg_rewind archive
[04:53:04.641](0.000s) not ok 44 - table content: query result matches
[04:53:04.696](0.000s) not ok 47 - table content: query result matches
[04:53:04.769](0.000s) not ok 50 - truncation: query result matches
[04:53:04.828](0.000s) not ok 53 - tail-copy: query result matches
[04:53:04.880](0.052s) not ok 54 - drop: psql exit code
[04:53:04.881](0.000s) not ok 55 - drop: psql no stderr
[04:53:04.881](0.000s) not ok 56 - drop: query result matches |
| tap |
[04:53:14.422](9.164s) not ok 1 - pg_rewind local
[04:53:14.689](0.000s) not ok 4 - database names: query result matches
[04:53:25.676](10.707s) not ok 6 - pg_rewind remote
[04:53:25.677](0.000s) not ok 7 - recovery conf file sets dbname
[04:53:25.677](0.000s) not ok 8 - standby.signal created after pg_rewind
[04:53:26.136](0.004s) not ok 11 - database names: query result matches |
| 57/5893 |
Adding pg_dump flag for parallel export to pipes |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[02:10:23.228](5.005s) not ok 4 - dump from PITR 1
[02:10:23.479](0.250s) not ok 5 - dump from PITR 2 |
| tap |
[02:10:56.236](0.001s) not ok 2 - pg_dump: Failure in cat to file using pipe-command: matches
[02:10:59.130](2.893s) not ok 3 - Testing just with cat
[02:10:59.712](0.582s) not ok 4 - Testing with cat piped to gzip
[02:11:02.652](2.939s) not ok 5 - Testing just with gzip
[02:11:19.795](0.421s) not ok 2387 - defaults_dir_format_pipe: pg_dump runs |
| tap |
[02:05:31.778](0.411s) not ok 7 - dump before running pg_upgrade
[02:06:07.012](0.103s) not ok 19 - dump after running pg_upgrade |
| tap |
[02:08:20.953](0.687s) not ok 5 - dump primary server
[02:08:21.218](0.264s) not ok 6 - dump standby server
[02:08:22.240](1.021s) not ok 8 - dump catalogs of primary server
[02:08:22.327](0.085s) not ok 9 - dump catalogs of standby server
[02:08:22.330](0.002s) not ok 10 - compare primary and standby catalog dumps |
|
macOS - Sequoia - Meson |
| tap |
[02:04:39.286](4.555s) not ok 4 - dump from PITR 1
[02:04:39.495](0.209s) not ok 5 - dump from PITR 2 |
| tap |
[02:04:50.361](0.001s) not ok 2 - pg_dump: Failure in cat to file using pipe-command: matches
[02:04:51.225](0.863s) not ok 3 - Testing just with cat
[02:04:51.503](0.277s) not ok 4 - Testing with cat piped to gzip
[02:04:52.349](0.846s) not ok 5 - Testing just with gzip
[02:05:01.094](0.224s) not ok 2396 - defaults_dir_format_pipe: pg_dump runs |
| tap |
[02:02:50.883](0.245s) not ok 7 - dump before running pg_upgrade
[02:03:09.543](0.325s) not ok 19 - dump after running pg_upgrade |
| tap |
[02:04:10.731](0.256s) not ok 5 - dump primary server
[02:04:10.868](0.136s) not ok 6 - dump standby server
[02:04:11.725](0.856s) not ok 8 - dump catalogs of primary server
[02:04:11.743](0.018s) not ok 9 - dump catalogs of standby server
[02:04:11.743](0.000s) not ok 10 - compare primary and standby catalog dumps |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[02:09:48.790](5.085s) not ok 4 - dump from PITR 1
[02:09:48.879](0.087s) not ok 5 - dump from PITR 2 |
| tap |
[02:10:40.097](0.001s) not ok 2 - pg_dump: Failure in cat to file using pipe-command: matches
[02:10:41.178](1.081s) not ok 3 - Testing just with cat
[02:10:41.393](0.214s) not ok 4 - Testing with cat piped to gzip
[02:10:42.260](0.866s) not ok 5 - Testing just with gzip
[02:10:49.964](0.228s) not ok 2396 - defaults_dir_format_pipe: pg_dump runs |
| tap |
[02:04:24.968](0.096s) not ok 7 - dump before running pg_upgrade
[02:04:42.216](0.091s) not ok 19 - dump after running pg_upgrade |
| tap |
[02:07:11.884](0.325s) not ok 5 - dump primary server
[02:07:12.017](0.133s) not ok 6 - dump standby server
[02:07:12.678](0.660s) not ok 8 - dump catalogs of primary server
[02:07:12.689](0.011s) not ok 9 - dump catalogs of standby server
[02:07:12.690](0.000s) not ok 10 - compare primary and standby catalog dumps |
|
Linux - Debian Trixie - Meson |
| tap |
[02:05:05.759](1.518s) not ok 4 - dump from PITR 1
[02:05:05.851](0.092s) not ok 5 - dump from PITR 2 |
| tap |
[02:05:15.817](0.001s) not ok 2 - pg_dump: Failure in cat to file using pipe-command: matches
[02:05:17.085](0.598s) not ok 4 - Testing with cat piped to gzip
[02:05:29.526](0.466s) not ok 2396 - defaults_dir_format_pipe: pg_dump runs |
| tap |
[02:03:05.469](0.122s) not ok 7 - dump before running pg_upgrade
[02:03:27.267](0.074s) not ok 19 - dump after running pg_upgrade |
| tap |
[02:04:33.032](0.193s) not ok 5 - dump primary server
[02:04:33.101](0.069s) not ok 6 - dump standby server
[02:04:33.792](0.690s) not ok 8 - dump catalogs of primary server
[02:04:33.804](0.011s) not ok 9 - dump catalogs of standby server
[02:04:33.809](0.005s) not ok 10 - compare primary and standby catalog dumps |
|
NetBSD - Meson |
| tap |
[02:03:38.969](0.904s) not ok 4 - dump from PITR 1
[02:03:39.024](0.055s) not ok 5 - dump from PITR 2 |
| tap |
[02:03:48.124](0.001s) not ok 2 - pg_dump: Failure in cat to file using pipe-command: matches
[02:03:48.992](0.868s) not ok 3 - Testing just with cat
[02:03:49.745](0.752s) not ok 4 - Testing with cat piped to gzip
[02:03:50.051](0.306s) not ok 5 - Testing just with gzip
[02:04:09.330](1.989s) not ok 2387 - defaults_dir_format_pipe: pg_dump runs |
| tap |
[02:03:20.527](0.051s) not ok 7 - dump before running pg_upgrade
[02:03:44.244](0.032s) not ok 19 - dump after running pg_upgrade |
| tap |
[02:04:04.057](0.176s) not ok 5 - dump primary server
[02:04:04.136](0.078s) not ok 6 - dump standby server
[02:04:04.912](0.774s) not ok 8 - dump catalogs of primary server
[02:04:04.929](0.016s) not ok 9 - dump catalogs of standby server
[02:04:04.931](0.001s) not ok 10 - compare primary and standby catalog dumps |
|
Linux - Debian Trixie - Autoconf |
| tap |
[02:03:04.825](2.058s) not ok 4 - dump from PITR 1
[02:03:04.944](0.119s) not ok 5 - dump from PITR 2 |
| tap |
[02:06:45.959](0.165s) not ok 5 - dump primary server
[02:06:46.026](0.067s) not ok 6 - dump standby server
[02:06:46.718](0.691s) not ok 8 - dump catalogs of primary server
[02:06:46.730](0.012s) not ok 9 - dump catalogs of standby server
[02:06:46.731](0.000s) not ok 10 - compare primary and standby catalog dumps |
|
FreeBSD - Meson |
| tap |
[02:04:41.285](0.720s) not ok 4 - dump from PITR 1
[02:04:41.424](0.136s) not ok 5 - dump from PITR 2 |
| tap |
[02:04:53.919](0.001s) not ok 2 - pg_dump: Failure in cat to file using pipe-command: matches
[02:04:55.731](1.812s) not ok 3 - Testing just with cat
[02:04:57.111](1.379s) not ok 4 - Testing with cat piped to gzip
[02:04:59.255](2.135s) not ok 5 - Testing just with gzip
[02:06:16.647](2.424s) not ok 2396 - defaults_dir_format_pipe: pg_dump runs |
| tap |
[02:04:40.804](0.110s) not ok 7 - dump before running pg_upgrade
[02:05:17.717](0.110s) not ok 19 - dump after running pg_upgrade |
| tap |
[02:05:58.103](0.123s) not ok 5 - dump primary server
[02:05:58.164](0.060s) not ok 6 - dump standby server
[02:05:58.787](0.622s) not ok 8 - dump catalogs of primary server
[02:05:58.796](0.007s) not ok 9 - dump catalogs of standby server
[02:05:58.798](0.001s) not ok 10 - compare primary and standby catalog dumps |
|
OpenBSD - Meson |
| tap |
[02:06:06.278](5.331s) not ok 4 - dump from PITR 1
[02:06:06.387](0.109s) not ok 5 - dump from PITR 2 |
| tap |
[02:06:36.893](0.001s) not ok 2 - pg_dump: Failure in cat to file using pipe-command: matches
[02:06:39.066](2.173s) not ok 3 - Testing just with cat
[02:06:40.095](1.028s) not ok 4 - Testing with cat piped to gzip
[02:06:42.229](2.134s) not ok 5 - Testing just with gzip
[02:07:16.209](0.524s) not ok 2396 - defaults_dir_format_pipe: pg_dump runs |
| tap |
[02:04:16.166](0.158s) not ok 7 - dump before running pg_upgrade
[02:05:11.207](0.108s) not ok 19 - dump after running pg_upgrade |
| tap |
[02:06:38.732](0.323s) not ok 5 - dump primary server
[02:06:38.851](0.119s) not ok 6 - dump standby server
[02:06:39.633](0.774s) not ok 8 - dump catalogs of primary server
[02:06:39.670](0.034s) not ok 9 - dump catalogs of standby server
[02:06:39.673](0.001s) not ok 10 - compare primary and standby catalog dumps |
| 57/5992 |
Fix ALTER TABLE DROP EXPRESSION with ONLY option |
|
Linux - Debian Trixie - Meson |
| tap |
[01:47:11.470](72.791s) not ok 5 - regression tests pass |
| tap |
[01:48:42.423](0.001s) not ok 2 - regression tests pass |
|
OpenBSD - Meson |
| tap |
[01:48:12.340](118.439s) not ok 5 - regression tests pass |
| tap |
[01:50:48.241](0.001s) not ok 2 - regression tests pass |
|
Linux - Debian Trixie - Autoconf |
| tap |
[01:51:33.939](138.841s) not ok 5 - regression tests pass |
| tap |
[01:52:20.103](0.000s) not ok 2 - regression tests pass |
|
FreeBSD - Meson |
| tap |
[01:48:31.818](208.091s) not ok 5 - regression tests pass |
| tap |
[01:49:56.748](0.000s) not ok 2 - regression tests pass |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[01:49:26.803](140.347s) not ok 5 - regression tests pass |
| tap |
[01:52:39.500](0.000s) not ok 2 - regression tests pass |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[01:48:47.555](71.458s) not ok 5 - regression tests pass |
| tap |
[01:51:55.888](0.000s) not ok 2 - regression tests pass |
|
macOS - Sequoia - Meson |
| tap |
[01:47:59.968](49.236s) not ok 5 - regression tests pass |
| tap |
[01:49:07.649](0.000s) not ok 2 - regression tests pass |
| 57/6252 |
Proposal: Conflict log history table for Logical Replication |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[01:49:18.468](2.753s) not ok 1 - Verified multiple_unique_conflicts logged into internal table |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[01:44:41.423](4.177s) not ok 1 - Verified multiple_unique_conflicts logged into internal table |
|
OpenBSD - Meson |
| tap |
[01:40:26.602](2.506s) not ok 1 - Verified multiple_unique_conflicts logged into internal table
[01:40:27.617](0.864s) not ok 4 - Verified multiple_unique_conflicts logged into internal table |
|
FreeBSD - Meson |
| tap |
[01:38:23.853](2.438s) not ok 1 - Verified multiple_unique_conflicts logged into internal table |
| 57/6043 |
Checkpointer write combining |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[00:15:14.185](0.004s) not ok 2 - regression tests pass |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[00:17:56.444](0.000s) not ok 2 - regression tests pass |
|
OpenBSD - Meson |
| tap |
[00:15:15.648](0.001s) not ok 2 - regression tests pass |
| 57/6246 |
Remove ctid from self-join examples in UPDATE and DELETE docs |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[15:46:08.465](0.000s) not ok 2 - regression tests pass |
| 57/5947 |
Adding per backend commit and rollback counters |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[12:33:16.801](0.000s) not ok 18 - checking with a non-existent user stderr /(?^:role "no_such_user" does not exist)/ |
| 57/6292 |
Proposal to allow setting cursor options on Portals |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[10:38:04.417](0.128s) not ok 16 - libpq_pipeline protocol_version |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[10:34:00.504](0.247s) not ok 16 - libpq_pipeline protocol_version |
|
macOS - Sequoia - Meson |
| tap |
[10:24:05.091](0.035s) not ok 16 - libpq_pipeline protocol_version |
|
Linux - Debian Trixie - Meson |
| tap |
[10:26:06.168](0.041s) not ok 16 - libpq_pipeline protocol_version |
|
FreeBSD - Meson |
| tap |
[10:25:20.183](0.060s) not ok 16 - libpq_pipeline protocol_version |
|
Linux - Debian Trixie - Autoconf |
| tap |
[10:20:56.039](0.095s) not ok 16 - libpq_pipeline protocol_version |
|
NetBSD - Meson |
| tap |
[10:23:21.856](0.019s) not ok 16 - libpq_pipeline protocol_version |
|
OpenBSD - Meson |
| tap |
[10:26:52.334](0.098s) not ok 16 - libpq_pipeline protocol_version |
| 57/6054 |
let ALTER COLUMN SET DATA TYPE cope with POLICY dependency |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[10:12:47.924](0.001s) not ok 2 - regression tests pass |
| 58/6391 |
Use CASEFOLD() internally rather than LOWER() |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[08:30:24.130](4.336s) not ok 2 |
| tap |
[08:23:07.119](0.001s) not ok 2 - regression tests pass |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[08:33:53.369](2.557s) not ok 2 |
| tap |
[08:24:13.170](0.000s) not ok 2 - regression tests pass |
|
Linux - Debian Trixie - Meson |
| tap |
[08:27:08.775](0.000s) not ok 2 - regression tests pass |
|
NetBSD - Meson |
| tap |
[08:19:33.179](0.000s) not ok 2 - regression tests pass |
| 57/6234 |
Introduce a new GUC to allow logical walsender to shutdown immediately without waiting for a response from the client. |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[07:39:33.108](0.000s) not ok 4 - no lines with tabs in postgresql.conf.sample |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[07:37:18.465](0.001s) not ok 4 - no lines with tabs in postgresql.conf.sample |
|
macOS - Sequoia - Meson |
| tap |
[07:32:55.282](0.000s) not ok 4 - no lines with tabs in postgresql.conf.sample |
|
Linux - Debian Trixie - Meson |
| tap |
[07:29:52.808](0.000s) not ok 4 - no lines with tabs in postgresql.conf.sample |
|
FreeBSD - Meson |
| tap |
[07:28:07.109](0.000s) not ok 4 - no lines with tabs in postgresql.conf.sample |
|
OpenBSD - Meson |
| tap |
[07:30:57.884](0.000s) not ok 4 - no lines with tabs in postgresql.conf.sample |
|
Linux - Debian Trixie - Autoconf |
| tap |
[07:26:18.417](0.000s) not ok 4 - no lines with tabs in postgresql.conf.sample |
|
NetBSD - Meson |
| tap |
[07:26:52.588](0.000s) not ok 4 - no lines with tabs in postgresql.conf.sample |
| 57/5957 |
implement CAST(expr AS type FORMAT 'template') |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[04:04:20.939](71.493s) not ok 5 - regression tests pass |
| tap |
[04:07:59.702](0.000s) not ok 2 - regression tests pass |
|
macOS - Sequoia - Meson |
| tap |
[04:00:09.552](39.037s) not ok 5 - regression tests pass |
| tap |
[04:01:25.226](0.000s) not ok 2 - regression tests pass |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[04:02:08.016](140.000s) not ok 5 - regression tests pass |
| tap |
[04:05:12.929](0.001s) not ok 2 - regression tests pass |
|
Linux - Debian Trixie - Meson |
| tap |
[04:02:35.308](70.640s) not ok 5 - regression tests pass |
| tap |
[04:04:09.031](0.000s) not ok 2 - regression tests pass |
|
FreeBSD - Meson |
| tap |
[04:02:47.310](211.309s) not ok 5 - regression tests pass |
| tap |
[04:04:02.089](0.000s) not ok 2 - regression tests pass |
|
NetBSD - Meson |
| tap |
[04:01:19.177](85.134s) not ok 5 - regression tests pass |
| tap |
[04:02:04.311](0.000s) not ok 2 - regression tests pass |
|
OpenBSD - Meson |
| tap |
[04:02:37.955](115.035s) not ok 5 - regression tests pass |
| tap |
[04:05:08.344](0.001s) not ok 2 - regression tests pass |
|
Linux - Debian Trixie - Autoconf |
| tap |
[04:05:51.157](154.232s) not ok 5 - regression tests pass |
| tap |
[04:07:19.412](0.000s) not ok 2 - regression tests pass |
| 58/6372 |
XSD schema validation |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[01:45:55.325](134.083s) not ok 5 - regression tests pass |
| tap |
[01:49:07.107](0.001s) not ok 2 - regression tests pass |
| 57/6274 |
Add a greedy join search algorithm to handle large join problems |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[06:22:25.342](77.969s) not ok 5 - regression tests pass |
| tap |
[06:25:44.865](0.001s) not ok 2 - regression tests pass |
| tap |
[06:34:43.577](1.501s) not ok 1 - no parameters missing from postgresql.conf.sample |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[06:19:52.921](146.891s) not ok 5 - regression tests pass |
| tap |
[06:23:09.280](0.001s) not ok 2 - regression tests pass |
| tap |
[06:30:30.360](2.299s) not ok 1 - no parameters missing from postgresql.conf.sample |
|
macOS - Sequoia - Meson |
| tap |
[06:19:04.744](42.822s) not ok 5 - regression tests pass |
| tap |
[06:21:03.388](0.001s) not ok 2 - regression tests pass |
| tap |
[06:24:24.153](1.300s) not ok 1 - no parameters missing from postgresql.conf.sample |
|
Linux - Debian Trixie - Meson |
| tap |
[06:19:15.996](78.042s) not ok 5 - regression tests pass |
| tap |
[06:20:51.927](0.000s) not ok 2 - regression tests pass |
| tap |
[06:23:42.314](2.331s) not ok 1 - no parameters missing from postgresql.conf.sample |
|
FreeBSD - Meson |
| tap |
[06:19:56.842](221.481s) not ok 5 - regression tests pass |
| tap |
[06:21:13.246](0.000s) not ok 2 - regression tests pass |
| tap |
[06:22:28.495](1.549s) not ok 1 - no parameters missing from postgresql.conf.sample |
|
Linux - Debian Trixie - Autoconf |
| tap |
[06:23:17.032](133.333s) not ok 5 - regression tests pass |
| tap |
[06:20:39.930](0.727s) not ok 1 - no parameters missing from postgresql.conf.sample |
| tap |
[06:24:10.228](0.000s) not ok 2 - regression tests pass |
|
OpenBSD - Meson |
| tap |
[06:19:34.380](114.532s) not ok 5 - regression tests pass |
| tap |
[06:22:16.493](0.001s) not ok 2 - regression tests pass |
| tap |
[06:24:56.148](0.623s) not ok 1 - no parameters missing from postgresql.conf.sample |
|
NetBSD - Meson |
| tap |
[06:18:41.741](101.512s) not ok 5 - regression tests pass |
| tap |
[06:19:25.992](0.021s) not ok 2 - regression tests pass |
| tap |
[06:20:31.829](0.252s) not ok 1 - no parameters missing from postgresql.conf.sample |
| 57/6299 |
New grouping strategy - Index Aggregate |
|
Linux - Debian Trixie - Meson |
| tap |
[06:04:16.362](78.318s) not ok 5 - regression tests pass |
| tap |
[06:05:51.372](0.000s) not ok 2 - regression tests pass |
|
OpenBSD - Meson |
| tap |
[05:57:47.092](49.977s) not ok 5 - regression tests pass
[05:58:15.746](10.913s) not ok 16 - run of pg_upgrade for new instance
[05:58:15.747](0.000s) not ok 17 - pg_upgrade_output.d/ removed after pg_upgrade success
[05:58:17.348](0.238s) not ok 20 - old and new dumps match after pg_upgrade |
| tap |
[05:59:43.006](89.030s) not ok 2 - regression tests pass
[05:59:43.008](0.001s) not ok 3 - primary alive after regression test run |
| 54/5829 |
VCI (columnar store extension) |
|
Linux - Debian Trixie - Meson |
| tap |
[01:38:25.052](1.807s) not ok 4 - dump from PITR 1
[01:38:25.549](0.491s) not ok 5 - dump from PITR 2 |
| tap |
[01:38:36.536](0.477s) not ok 21 - pg_dump: option -n pg_catalog
[01:38:36.942](0.406s) not ok 22 - pg_dumpall: option --exclude-database handles database names with embedded dots
[01:38:37.677](0.363s) not ok 39 - binary_upgrade: pg_dump runs
[01:38:37.709](0.032s) not ok 40 - binary_upgrade: pg_restore runs |
| tap |
[01:38:35.961](0.000s) not ok 2 - newline in dbname: stderr matches
[01:38:36.430](0.000s) not ok 5 - correctly fails to dump a foreign table from a dummy FDW: matches
[01:38:36.784](0.353s) not ok 6 - dump foreign server with no tables |
| tap |
[01:38:36.751](2.981s) not ok 1 - parallel dump
[01:38:36.775](0.023s) not ok 2 - parallel restore
[01:38:37.120](0.345s) not ok 3 - parallel dump as inserts
[01:38:37.137](0.016s) not ok 4 - parallel restore as inserts |
| tap |
[01:38:38.393](4.010s) not ok 1 - filter file without patterns |
| tap |
[01:38:37.358](2.551s) not ok 1 - compression_gzip_custom: pg_dump runs
[01:38:37.380](0.019s) not ok 2 - compression_gzip_custom: data content is gzip-compressed: exit code 0
[01:38:37.382](0.001s) not ok 3 - compression_gzip_custom: data content is gzip-compressed: no stderr
[01:38:37.383](0.000s) not ok 4 - compression_gzip_custom: data content is gzip-compressed: matches
[01:38:37.418](0.026s) not ok 5 - compression_gzip_custom: pg_restore runs |
| tap |
[01:38:39.616](0.604s) not ok 7 - parallel dump
[01:38:39.811](0.195s) not ok 8 - parallel restore
[01:38:39.863](0.051s) not ok 9 - parallel restore with create
[01:38:40.328](0.465s) not ok 10 - take full dump |
| tap |
[01:36:27.369](0.387s) not ok 7 - dump before running pg_upgrade
[01:36:35.188](3.473s) not ok 16 - run of pg_upgrade for new instance
[01:36:35.196](0.004s) not ok 17 - pg_upgrade_output.d/ removed after pg_upgrade success
[01:36:35.409](0.051s) not ok 18 - check that locales in new cluster match original cluster
[01:36:35.919](0.505s) not ok 19 - dump after running pg_upgrade
[01:36:35.921](0.002s) not ok 20 - old and new dumps match after pg_upgrade |
| tap |
[01:35:11.352](0.000s) not ok 2 - run of pg_upgrade where the new cluster has insufficient "max_replication_slots" stdou...
[01:35:19.964](7.006s) not ok 10 - run of pg_upgrade of old cluster
[01:35:20.198](0.232s) not ok 11 - check the slot exists on new cluster |
| tap |
[01:35:23.952](2.676s) not ok 12 - run of pg_upgrade for old instance when the subscription tables are in init/ready sta...
[01:35:23.953](0.001s) not ok 13 - pg_upgrade_output.d/ removed after successful pg_upgrade
[01:35:24.368](0.414s) not ok 14 - check that the subscription's running status, failover, and retain_dead_tuples are pr...
[01:35:24.405](0.037s) not ok 15 - there should be 3 rows in pg_subscription_rel(representing tab_upgraded, tab_upgraded... |
| tap |
[01:35:09.982](2.287s) not ok 13 - run of pg_upgrade
[01:35:09.997](0.001s) not ok 16 - the default char signedness is updated during pg_upgrade: matches |
| tap |
[01:35:12.709](8.372s) not ok 1 - pg_upgrade with transfer mode --clone: stdout matches
[01:35:25.394](8.838s) not ok 3 - pg_upgrade with transfer mode --copy: stdout matches
[01:35:38.825](9.794s) not ok 5 - pg_upgrade with transfer mode --copy-file-range: stdout matches
[01:35:48.930](5.689s) not ok 7 - pg_upgrade with transfer mode --link: stdout matches
[01:35:58.011](6.138s) not ok 9 - pg_upgrade with transfer mode --swap: stdout matches |
| tap |
[01:35:24.504](4.778s) not ok 1 - run of pg_upgrade for new instance |
| tap |
[01:37:49.376](0.532s) not ok 5 - dump primary server
[01:37:49.886](0.509s) not ok 6 - dump standby server
[01:37:51.530](1.643s) not ok 8 - dump catalogs of primary server
[01:37:52.442](0.910s) not ok 9 - dump catalogs of standby server
[01:37:52.443](0.000s) not ok 10 - compare primary and standby catalog dumps |
| tap |
[01:40:40.706](3.249s) not ok 1 - binary_upgrade: pg_dump runs |
| 57/6156 |
Add GoAway protocol message for graceful but fast server shutdown/switchover |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[23:50:42.482](0.088s) not ok 15 - libpq_pipeline protocol_version |
|
macOS - Sequoia - Meson |
| tap |
[23:41:20.982](0.045s) not ok 15 - libpq_pipeline protocol_version |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[23:46:47.262](0.109s) not ok 15 - libpq_pipeline protocol_version |
|
Linux - Debian Trixie - Meson |
| tap |
[23:40:40.872](0.030s) not ok 15 - libpq_pipeline protocol_version |
|
NetBSD - Meson |
| tap |
[23:37:51.181](0.024s) not ok 15 - libpq_pipeline protocol_version |
|
OpenBSD - Meson |
| tap |
[23:42:16.833](0.263s) not ok 15 - libpq_pipeline protocol_version |
|
FreeBSD - Meson |
| tap |
[23:39:41.188](0.013s) not ok 15 - libpq_pipeline protocol_version |
|
Linux - Debian Trixie - Autoconf |
| tap |
[23:35:40.742](0.083s) not ok 15 - libpq_pipeline protocol_version |
| 57/6303 |
refactor handling optional argument in system functions |
|
Linux - Debian Trixie - Autoconf |
| tap |
[13:34:39.270](31.095s) not ok 5 - regression tests pass
[13:35:14.053](15.467s) not ok 16 - run of pg_upgrade for new instance
[13:35:14.054](0.000s) not ok 17 - pg_upgrade_output.d/ removed after pg_upgrade success
[13:35:15.958](0.038s) not ok 20 - old and new dumps match after pg_upgrade |
| tap |
[13:36:18.333](19.548s) not ok 2 - regression tests pass
[13:36:18.334](0.000s) not ok 3 - primary alive after regression test run |
| 57/6343 |
Reuse data from readRecordBuf in XLogDecodeNextRecord |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[15:50:34.718](0.002s) not ok 41 - WAL segment 00000001000000000000000F archived after timeline jump |
| tap |
[15:51:03.241](0.135s) not ok 2 - incremental backup from node1 |
| tap |
[15:51:13.559](2.069s) not ok 1 - full backup from node1
[15:51:13.583](0.024s) not ok 2 - incremental backup from node1
[15:51:13.611](0.027s) not ok 3 - another incremental backup from node1
[15:51:14.491](0.258s) not ok 5 - incremental backup from node2
[15:51:14.521](0.000s) not ok 7 - can't combine full backups: matches
[15:51:14.546](0.000s) not ok 9 - can't combine full backups: matches
[15:51:14.593](0.001s) not ok 11 - can't combine backups from different nodes: matches |
| tap |
[15:51:17.020](2.017s) not ok 1 - full backup |
| tap |
[15:51:20.900](0.001s) not ok 3 - incremental backup fails: matches |
| tap |
[15:56:14.232](291.235s) # poll_query_until timed out executing this query: |
| tap |
[15:52:21.668](0.436s) not ok 2 - incremental backup |
| tap |
[15:52:24.096](0.863s) not ok 1 - full backup |
| tap |
[15:53:02.969](4.773s) Bail out! command "pg_ctl --pgdata C:/cirrus/build/testrun/pg_rewind/001_basic/data/t_001_basic_... |
| tap |
[15:53:10.027](6.422s) Bail out! command "pg_ctl --pgdata C:/cirrus/build/testrun/pg_rewind/002_databases/data/t_002_da... |
| tap |
[15:53:10.200](4.859s) not ok 1 - pg_rewind local
[15:53:10.533](0.332s) not ok 2 - file lists match
[15:53:15.961](5.271s) not ok 3 - pg_rewind remote
[15:53:15.962](0.001s) not ok 4 - recovery conf file sets dbname
[15:53:15.962](0.000s) not ok 5 - standby.signal created after pg_rewind
[15:53:16.282](0.320s) Bail out! pg_ctl start failed |
| tap |
[15:53:12.016](4.258s) Bail out! command "pg_ctl --pgdata C:/cirrus/build/testrun/pg_rewind/004_pg_xlog_symlink/data/t_... |
| tap |
[15:53:29.131](16.008s) not ok 1 - pg_rewind remote
[15:53:29.445](0.000s) not ok 4 - table content after rewind: query result matches
[15:58:16.160](286.715s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/bin/pg_rewind/t/007_standby_source.pl line 164. |
| tap |
[15:58:10.963](294.074s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/bin/pg_rewind/t/008_min_recovery_point.pl line 101. |
| tap |
[15:54:53.639](0.954s) not ok 33 - runs with start segment specified: exit code 0
[15:54:54.500](0.843s) not ok 38 - runs with start and end segment specified: exit code 0
[15:54:57.925](0.890s) not ok 48 - no output with --quiet option: exit code 0 |
| tap |
[15:55:03.227](0.829s) not ok 2 - pg_waldump with --save-fullpage runs
[15:55:03.230](0.002s) not ok 3 - verify that at least one block has been saved |
| tap |
[15:59:23.695](258.384s) # poll_query_until timed out executing this query:
[15:59:23.698](0.003s) not ok 1 - WAL summarization caught up after insert
[16:03:45.842](262.144s) # poll_query_until timed out executing this query: |
| tap |
[15:40:02.771](255.796s) # poll_query_until timed out executing this query: |
| tap |
[15:35:54.964](0.045s) not ok 6 - Rollback prepared transaction after teardown |
| tap |
[15:36:05.608](0.070s) not ok 10 - replay from slot before_basebackup succeeds
[15:36:05.609](0.000s) not ok 11 - decoded expected data from slot before_basebackup
[15:36:05.610](0.000s) not ok 12 - replay from slot before_basebackup produces no stderr |
| tap |
[15:40:54.072](283.471s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/012_subtransactions.pl line 152. |
| tap |
[15:40:11.158](4.504s) Bail out! command "pg_ctl --pgdata C:/cirrus/build/testrun/recovery/015_promotion_pages/data/t_0... |
| tap |
[15:40:20.280](1.415s) Bail out! pg_ctl start failed |
| tap |
[15:40:50.596](5.061s) Bail out! pg_ctl start failed |
| tap |
[15:41:00.060](5.566s) Bail out! pg_ctl start failed |
| tap |
[15:41:55.264](0.000s) not ok 4 - standby alive after regression test run
[15:46:38.180](282.915s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/027_stream_regress.pl line 122. |
| tap |
[15:46:20.472](290.210s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/032_relfilenode_reuse.pl line 186. |
| tap |
[15:47:00.185](284.006s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/035_standby_logical_decoding.pl line 281. |
| tap |
[15:46:24.085](1.439s) Bail out! pg_ctl start failed |
| tap |
[15:46:35.894](1.603s) Bail out! pg_ctl start failed |
| tap |
[15:46:58.479](5.582s) Bail out! command "pg_ctl --pgdata C:/cirrus/build/testrun/recovery/043_no_contrecord_switch/dat... |
| tap |
[15:47:10.401](1.751s) Bail out! pg_ctl start failed |
| tap |
[15:52:38.598](296.324s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/051_effective_wal_level.pl line 223. |
| tap |
[15:59:58.834](0.842s) Bail out! pg_ctl start failed |
| tap |
[16:00:03.652](0.830s) Bail out! pg_ctl start failed |
| tap |
[16:01:50.017](0.511s) Bail out! pg_ctl start failed |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[15:41:03.111](0.009s) not ok 41 - WAL segment 00000001000000000000000C archived after timeline jump |
| tap |
[15:40:56.185](0.193s) not ok 2 - full backup |
| tap |
[15:40:57.918](2.780s) not ok 1 - full backup from node1 |
| tap |
[15:41:02.647](3.157s) not ok 1 - full backup from node1
[15:41:02.679](0.031s) not ok 2 - incremental backup from node1
[15:41:02.711](0.032s) not ok 3 - another incremental backup from node1
[15:41:03.964](1.253s) not ok 4 - full backup from node2
[15:41:03.993](0.027s) not ok 5 - incremental backup from node2
[15:41:04.297](0.000s) not ok 7 - can't combine full backups: matches
[15:41:04.378](0.000s) not ok 9 - can't combine full backups: matches
[15:41:04.438](0.000s) not ok 11 - can't combine backups from different nodes: matches |
| tap |
[15:41:06.597](2.674s) not ok 1 - full backup |
| tap |
[15:41:07.910](2.896s) not ok 1 - full backup |
| tap |
[15:41:10.057](2.559s) not ok 1 - full backup
[15:41:10.121](0.063s) not ok 2 - incremental backup |
| tap |
[15:41:11.639](1.282s) not ok 1 - full backup |
| tap |
[15:41:56.108](1.110s) not ok 5 - pg_rewind local
[15:41:56.536](0.001s) not ok 8 - table content: query result matches
[15:41:56.599](0.001s) not ok 11 - table content: query result matches
[15:41:56.800](0.000s) not ok 14 - truncation: query result matches
[15:41:56.888](0.000s) not ok 17 - tail-copy: query result matches
[15:41:56.950](0.062s) not ok 18 - drop: psql exit code
[15:41:56.952](0.001s) not ok 19 - drop: psql no stderr
[15:41:56.953](0.000s) not ok 20 - drop: query result matches
[15:42:03.005](5.907s) Bail out! command "pg_ctl --pgdata C:\cirrus\build/testrun/pg_rewind/001_basic\data/t_001_basic_... |
| tap |
[15:41:48.173](7.927s) Bail out! command "pg_ctl --pgdata C:\cirrus\build/testrun/pg_rewind/002_databases\data/t_002_da... |
| tap |
[15:41:53.475](4.711s) not ok 1 - pg_rewind local
[15:41:53.813](0.338s) not ok 2 - file lists match
[15:42:09.500](15.521s) not ok 3 - pg_rewind remote
[15:42:09.505](0.003s) not ok 4 - recovery conf file sets dbname
[15:42:09.506](0.000s) not ok 5 - standby.signal created after pg_rewind
[15:42:09.847](0.340s) Bail out! pg_ctl start failed |
| tap |
[15:42:01.033](5.298s) Bail out! command "pg_ctl --pgdata C:\cirrus\build/testrun/pg_rewind/004_pg_xlog_symlink\data/t_... |
| tap |
[15:42:30.711](26.292s) Bail out! command "pg_ctl --pgdata C:\cirrus\build/testrun/pg_rewind/007_standby_source\data/t_... |
| tap |
[15:48:23.607](375.789s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/bin/pg_rewind/t/008_min_recovery_point.pl line 101. |
| tap |
[15:42:15.788](5.336s) Bail out! command "pg_ctl --pgdata C:\cirrus\build/testrun/pg_rewind/009_growing_files\data/t_00... |
| tap |
[15:42:49.239](1.251s) not ok 33 - runs with start segment specified: exit code 0
[15:42:50.568](1.294s) not ok 38 - runs with start and end segment specified: exit code 0
[15:42:56.609](1.314s) not ok 48 - no output with --quiet option: exit code 0 |
| tap |
[15:42:47.798](1.267s) not ok 2 - pg_waldump with --save-fullpage runs
[15:42:47.803](0.004s) not ok 3 - verify that at least one block has been saved |
| tap |
[15:48:13.755](325.800s) # poll_query_until timed out executing this query:
[15:48:13.758](0.003s) not ok 1 - WAL summarization caught up after insert
[15:52:32.809](259.051s) # poll_query_until timed out executing this query: |
| tap |
[15:38:01.274](359.283s) # poll_query_until timed out executing this query: |
| tap |
[15:32:48.633](0.106s) not ok 6 - Rollback prepared transaction after teardown |
| tap |
[15:33:01.797](0.108s) not ok 10 - replay from slot before_basebackup succeeds
[15:33:01.798](0.000s) not ok 11 - decoded expected data from slot before_basebackup
[15:33:01.799](0.000s) not ok 12 - replay from slot before_basebackup produces no stderr |
| tap |
[15:39:17.041](363.853s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/012_subtransactions.pl line 152. |
| tap |
[15:33:25.014](15.356s) Bail out! command "pg_ctl --pgdata C:\cirrus\build/testrun/recovery/015_promotion_pages\data/t_... |
| tap |
[15:33:19.273](1.430s) Bail out! pg_ctl start failed |
| tap |
[15:33:43.068](6.439s) Bail out! pg_ctl start failed |
| tap |
[15:33:56.261](5.839s) Bail out! pg_ctl start failed |
| tap |
[15:35:16.498](0.001s) not ok 4 - standby alive after regression test run
[15:40:54.312](337.813s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/027_stream_regress.pl line 122. |
| tap |
[15:40:16.779](345.096s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/032_relfilenode_reuse.pl line 186. |
| tap |
[15:40:32.827](344.645s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/035_standby_logical_decoding.pl line 281. |
| tap |
[15:35:12.323](1.486s) Bail out! pg_ctl start failed |
| tap |
[15:35:25.401](1.666s) Bail out! pg_ctl start failed |
| tap |
[15:36:28.212](5.583s) Bail out! command "pg_ctl --pgdata C:\cirrus\build/testrun/recovery/043_no_contrecord_switch\dat... |
| tap |
[15:37:04.759](1.779s) Bail out! pg_ctl start failed |
| tap |
[15:37:13.641](1.468s) Bail out! pg_ctl start failed |
| tap |
[15:44:18.552](370.759s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/051_effective_wal_level.pl line 223. |
| tap |
[15:45:18.409](1.046s) Bail out! pg_ctl start failed |
| tap |
[15:45:20.538](0.953s) Bail out! pg_ctl start failed |
| tap |
[15:46:55.048](0.815s) Bail out! pg_ctl start failed |
|
macOS - Sequoia - Meson |
| tap |
[15:36:57.657](313.973s) # poll_query_until timed out executing this query: |
| tap |
[15:32:09.075](0.031s) not ok 6 - Rollback prepared transaction after teardown
[15:38:40.315](391.239s) Bail out! pg_ctl stop failed |
| tap |
[15:32:27.793](0.064s) not ok 10 - replay from slot before_basebackup succeeds
[15:32:27.796](0.002s) not ok 11 - decoded expected data from slot before_basebackup
[15:32:27.798](0.000s) not ok 12 - replay from slot before_basebackup produces no stderr |
| tap |
[15:37:48.925](319.489s) # poll_query_until timed out executing this query:
timed out waiting for catchup at /Users/admin/pgsql/src/test/recovery/t/012_subtransactions.pl line 152. |
| tap |
[15:33:20.906](46.249s) Bail out! command "pg_ctl --pgdata /Users/admin/pgsql/build/testrun/recovery/015_promotion_page... |
| tap |
[15:33:48.374](44.553s) Bail out! pg_ctl start failed |
| tap |
[15:34:51.093](18.116s) Bail out! pg_ctl start failed |
| tap |
[15:35:44.751](49.936s) Bail out! pg_ctl start failed |
| tap |
[15:36:21.065](0.001s) not ok 4 - standby alive after regression test run |
| tap |
[15:37:52.691](31.356s) Bail out! pg_ctl restart failed |
| tap |
[15:37:52.143](33.866s) Bail out! pg_ctl start failed |
| tap |
[15:38:40.880](51.555s) Bail out! pg_ctl start failed |
| tap |
[15:38:29.477](22.508s) Bail out! command "pg_ctl --pgdata /Users/admin/pgsql/build/testrun/recovery/043_no_contrecord_... |
| tap |
[15:38:39.925](3.160s) Bail out! failed to execute command "cp -RPp /Users/admin/pgsql/build/tmp_install/initdb-templat... |
|
NetBSD - Meson |
| tap |
[15:35:45.468](1.122s) Bail out! pg_ctl start failed |
| tap |
[15:35:35.996](0.008s) not ok 41 - WAL segment 00000001000000000000000E archived after timeline jump |
| tap |
[15:35:40.347](0.189s) Bail out! pg_ctl start failed |
| tap |
[15:35:40.706](0.185s) Bail out! pg_ctl start failed |
| tap |
[15:35:42.336](0.192s) Bail out! pg_ctl start failed |
| tap |
[15:35:42.678](0.176s) Bail out! pg_ctl start failed |
| tap |
[15:35:43.016](0.185s) Bail out! pg_ctl start failed |
| tap |
[15:35:43.353](0.175s) Bail out! pg_ctl start failed |
| tap |
[15:35:43.687](0.182s) Bail out! pg_ctl start failed |
| tap |
[15:35:44.029](0.177s) Bail out! pg_ctl start failed |
| tap |
[15:35:54.737](0.565s) not ok 5 - pg_rewind local
[15:35:54.898](0.000s) not ok 8 - table content: query result matches
[15:35:54.917](0.000s) not ok 11 - table content: query result matches
[15:35:54.951](0.000s) not ok 14 - truncation: query result matches
[15:35:55.011](0.001s) not ok 17 - tail-copy: query result matches
[15:35:55.027](0.015s) not ok 18 - drop: psql exit code
[15:35:55.028](0.000s) not ok 19 - drop: psql no stderr
[15:35:55.030](0.001s) not ok 20 - drop: query result matches
[15:35:56.596](1.417s) not ok 22 - pg_rewind remote
[15:35:56.597](0.001s) not ok 23 - recovery conf file sets dbname
[15:35:56.598](0.000s) not ok 24 - standby.signal created after pg_rewind
[15:35:56.795](0.004s) not ok 27 - table content: query result matches
[15:35:56.851](0.001s) not ok 30 - table content: query result matches
[15:35:56.880](0.001s) not ok 33 - truncation: query result matches
[15:35:56.924](0.001s) not ok 36 - tail-copy: query result matches
[15:35:56.936](0.012s) not ok 37 - drop: psql exit code
[15:35:56.937](0.000s) not ok 38 - drop: psql no stderr
[15:35:56.938](0.000s) not ok 39 - drop: query result matches
[15:35:58.813](1.608s) Bail out! command "pg_ctl --pgdata /home/postgres/postgres/build/testrun/pg_rewind/001_basic/dat... |
| tap |
[15:35:54.745](1.808s) Bail out! command "pg_ctl --pgdata /home/postgres/postgres/build/testrun/pg_rewind/002_databases... |
| tap |
[15:35:54.353](0.971s) not ok 1 - pg_rewind local
[15:35:54.483](0.129s) not ok 2 - file lists match
[15:35:55.605](1.014s) not ok 3 - pg_rewind remote
[15:35:55.606](0.000s) not ok 4 - recovery conf file sets dbname
[15:35:55.606](0.000s) not ok 5 - standby.signal created after pg_rewind
[15:35:55.748](0.142s) Bail out! pg_ctl start failed |
| tap |
[15:35:56.214](1.109s) not ok 1 - pg_rewind local
[15:35:56.358](0.000s) not ok 4 - table content: query result matches
[15:35:57.433](0.959s) not ok 5 - pg_rewind remote
[15:35:57.434](0.000s) not ok 6 - recovery conf file sets dbname
[15:35:57.435](0.000s) not ok 7 - standby.signal created after pg_rewind
[15:35:57.617](0.000s) not ok 10 - table content: query result matches |
| tap |
[15:35:58.974](1.605s) not ok 1 - pg_rewind remote
[15:35:59.131](0.000s) not ok 4 - table content after rewind: query result matches
[15:39:38.677](219.546s) # poll_query_until timed out executing this query:
timed out waiting for catchup at /home/postgres/postgres/src/bin/pg_rewind/t/007_standby_source.pl line 164. |
| tap |
[15:39:39.228](221.657s) # poll_query_until timed out executing this query:
timed out waiting for catchup at /home/postgres/postgres/src/bin/pg_rewind/t/008_min_recovery_point.pl line 101. |
| tap |
[15:35:58.926](0.890s) Bail out! command "pg_ctl --pgdata /home/postgres/postgres/build/testrun/pg_rewind/009_growing_f... |
| tap |
[15:36:03.307](4.150s) not ok 1 - some WAL files were skipped |
| tap |
[15:36:14.183](0.003s) not ok 33 - runs with start segment specified: exit code 0
[15:36:14.183](0.001s) not ok 34 - runs with start segment specified: no stderr
[15:36:14.190](0.003s) not ok 38 - runs with start and end segment specified: exit code 0
[15:36:14.191](0.000s) not ok 39 - runs with start and end segment specified: no stderr
[15:36:14.406](0.005s) not ok 48 - no output with --quiet option: exit code 0
[15:36:14.407](0.000s) not ok 49 - no output with --quiet option: no stderr |
| tap |
[15:36:14.786](0.004s) not ok 2 - pg_waldump with --save-fullpage runs
[15:36:14.786](0.000s) not ok 3 - verify that at least one block has been saved |
| tap |
[15:36:15.127](0.174s) Bail out! pg_ctl start failed |
| tap |
[15:30:48.508](1.053s) not ok 1 - promotion of standby with pg_promote
[15:34:26.197](217.688s) # poll_query_until timed out executing this query: |
| tap |
[15:30:57.622](0.013s) not ok 6 - Rollback prepared transaction after teardown |
| tap |
[15:30:58.574](0.021s) not ok 10 - replay from slot before_basebackup succeeds
[15:30:58.575](0.000s) not ok 11 - decoded expected data from slot before_basebackup
[15:30:58.576](0.000s) not ok 12 - replay from slot before_basebackup produces no stderr |
| tap |
[15:34:40.076](219.607s) # poll_query_until timed out executing this query:
timed out waiting for catchup at /home/postgres/postgres/src/test/recovery/t/012_subtransactions.pl line 152. |
| tap |
[15:31:10.708](1.053s) Bail out! command "pg_ctl --pgdata /home/postgres/postgres/build/testrun/recovery/015_promotion_... |
| tap |
[15:38:38.426](445.366s) Bail out! pg_ctl start failed |
| tap |
[15:31:23.256](0.246s) Bail out! pg_ctl start failed |
| tap |
[15:31:40.267](1.187s) Bail out! pg_ctl start failed |
| tap |
[15:31:45.306](0.556s) Bail out! pg_ctl start failed |
| tap |
[15:32:12.719](0.000s) not ok 4 - standby alive after regression test run
[15:35:53.066](220.347s) # poll_query_until timed out executing this query:
timed out waiting for catchup at /home/postgres/postgres/src/test/recovery/t/027_stream_regress.pl line 122. |
| tap |
[15:32:09.768](0.249s) Bail out! pg_ctl restart failed |
| tap |
[15:32:10.798](0.260s) Bail out! pg_ctl start failed |
| tap |
[15:32:14.277](0.300s) Bail out! pg_ctl start failed |
| tap |
[15:34:30.178](1.066s) Bail out! command "pg_ctl --pgdata /home/postgres/postgres/build/testrun/recovery/043_no_contrec... |
| tap |
[15:34:33.478](0.463s) not ok 1 - Logical slot still valid |
| tap |
[15:38:22.541](223.399s) # poll_query_until timed out executing this query:
timed out waiting for catchup at /home/postgres/postgres/src/test/recovery/t/051_effective_wal_level.pl line 223. |
| tap |
[15:37:03.818](0.502s) Bail out! pg_ctl start failed |
| tap |
[15:37:04.627](0.493s) Bail out! pg_ctl start failed |
| tap |
[15:37:42.846](0.239s) Bail out! pg_ctl start failed |
|
FreeBSD - Meson |
| tap |
[15:36:07.268](0.001s) not ok 41 - WAL segment 00000001000000000000000E archived after timeline jump |
| tap |
[15:36:09.430](0.026s) not ok 2 - full backup |
| tap |
[15:36:11.236](0.444s) not ok 2 - incremental backup from node1 |
| tap |
[15:36:13.714](1.169s) not ok 1 - full backup from node1
[15:36:13.719](0.005s) not ok 2 - incremental backup from node1
[15:36:13.724](0.004s) not ok 3 - another incremental backup from node1
[15:36:13.844](0.028s) not ok 5 - incremental backup from node2
[15:36:13.849](0.000s) not ok 7 - can't combine full backups: matches
[15:36:13.853](0.000s) not ok 9 - can't combine full backups: matches
[15:36:13.856](0.000s) not ok 11 - can't combine backups from different nodes: matches |
| tap |
[15:36:14.889](0.001s) not ok 3 - incremental backup fails: matches |
| tap |
[15:39:41.215](206.374s) # poll_query_until timed out executing this query: |
| tap |
[15:36:15.333](0.017s) not ok 2 - incremental backup |
| tap |
[15:36:16.306](0.045s) not ok 1 - full backup |
| tap |
[15:36:34.854](0.472s) not ok 5 - pg_rewind local
[15:36:34.987](0.000s) not ok 8 - table content: query result matches
[15:36:34.999](0.000s) not ok 11 - table content: query result matches
[15:36:35.014](0.000s) not ok 14 - truncation: query result matches
[15:36:35.042](0.000s) not ok 17 - tail-copy: query result matches
[15:36:35.050](0.007s) not ok 18 - drop: psql exit code
[15:36:35.051](0.000s) not ok 19 - drop: psql no stderr
[15:36:35.052](0.000s) not ok 20 - drop: query result matches
[15:36:37.088](1.913s) not ok 22 - pg_rewind remote
[15:36:37.089](0.000s) not ok 23 - recovery conf file sets dbname
[15:36:37.089](0.000s) not ok 24 - standby.signal created after pg_rewind
[15:36:37.224](0.000s) not ok 27 - table content: query result matches
[15:36:37.237](0.000s) not ok 30 - table content: query result matches
[15:36:37.256](0.001s) not ok 33 - truncation: query result matches
[15:36:37.286](0.000s) not ok 36 - tail-copy: query result matches
[15:36:37.296](0.009s) not ok 37 - drop: psql exit code
[15:36:37.297](0.000s) not ok 38 - drop: psql no stderr
[15:36:37.297](0.000s) not ok 39 - drop: query result matches
[15:38:42.414](122.916s) Bail out! pg_ctl start failed |
| tap |
[15:36:37.442](1.722s) Bail out! command "pg_ctl --pgdata /tmp/cirrus-ci-build/build/testrun/pg_rewind/002_databases/da... |
| tap |
[15:36:39.582](1.900s) not ok 1 - pg_rewind local
[15:36:39.695](0.113s) not ok 2 - file lists match
[15:36:41.654](1.844s) not ok 3 - pg_rewind remote
[15:36:41.655](0.000s) not ok 4 - recovery conf file sets dbname
[15:36:41.655](0.000s) not ok 5 - standby.signal created after pg_rewind
[15:36:41.771](0.115s) Bail out! pg_ctl start failed |
| tap |
[15:36:43.808](1.798s) not ok 1 - pg_rewind local
[15:36:43.933](0.000s) not ok 4 - table content: query result matches
[15:36:45.752](1.706s) not ok 5 - pg_rewind remote
[15:36:45.753](0.000s) not ok 6 - recovery conf file sets dbname
[15:36:45.753](0.000s) not ok 7 - standby.signal created after pg_rewind
[15:36:45.885](0.000s) not ok 10 - table content: query result matches |
| tap |
[15:36:51.211](2.852s) not ok 1 - pg_rewind remote
[15:36:51.337](0.000s) not ok 4 - table content after rewind: query result matches
[15:40:18.792](207.455s) # poll_query_until timed out executing this query:
timed out waiting for catchup at /tmp/cirrus-ci-build/src/bin/pg_rewind/t/007_standby_source.pl line 164. |
| tap |
[15:40:34.084](210.435s) # poll_query_until timed out executing this query:
timed out waiting for catchup at /tmp/cirrus-ci-build/src/bin/pg_rewind/t/008_min_recovery_point.pl line 101. |
| tap |
[15:37:15.014](4.815s) not ok 1 - some WAL files were skipped |
| tap |
[15:37:33.109](0.003s) not ok 33 - runs with start segment specified: exit code 0
[15:37:33.110](0.000s) not ok 34 - runs with start segment specified: no stderr
[15:37:33.116](0.003s) not ok 38 - runs with start and end segment specified: exit code 0
[15:37:33.117](0.000s) not ok 39 - runs with start and end segment specified: no stderr
[15:37:33.215](0.003s) not ok 48 - no output with --quiet option: exit code 0
[15:37:33.216](0.000s) not ok 49 - no output with --quiet option: no stderr |
| tap |
[15:37:34.741](0.004s) not ok 2 - pg_waldump with --save-fullpage runs
[15:37:34.741](0.000s) not ok 3 - verify that at least one block has been saved |
| tap |
[15:30:09.697](0.037s) not ok 6 - Rollback prepared transaction after teardown |
| tap |
[15:30:11.697](0.014s) not ok 10 - replay from slot before_basebackup succeeds
[15:30:11.698](0.000s) not ok 11 - decoded expected data from slot before_basebackup
[15:30:11.699](0.000s) not ok 12 - replay from slot before_basebackup produces no stderr |
| tap |
[15:33:48.422](213.733s) # poll_query_until timed out executing this query:
timed out waiting for catchup at /tmp/cirrus-ci-build/src/test/recovery/t/012_subtransactions.pl line 152. |
| tap |
[15:30:23.760](1.954s) Bail out! command "pg_ctl --pgdata /tmp/cirrus-ci-build/build/testrun/recovery/015_promotion_pag... |
| tap |
[15:41:25.814](656.586s) Bail out! pg_ctl start failed |
| tap |
[15:30:33.830](1.088s) Bail out! pg_ctl start failed |
| tap |
[15:31:17.495](1.845s) Bail out! pg_ctl start failed |
| tap |
[15:31:29.977](0.501s) Bail out! pg_ctl start failed |
| tap |
[15:32:40.166](0.000s) not ok 4 - standby alive after regression test run
[15:36:06.648](206.481s) # poll_query_until timed out executing this query:
timed out waiting for catchup at /tmp/cirrus-ci-build/src/test/recovery/t/027_stream_regress.pl line 122. |
| tap |
[15:35:27.926](206.587s) # poll_query_until timed out executing this query:
timed out waiting for catchup at /tmp/cirrus-ci-build/src/test/recovery/t/035_standby_logical_decoding.pl line 281. |
| tap |
[15:32:07.505](0.660s) Bail out! pg_ctl start failed |
| tap |
[15:32:14.679](0.464s) Bail out! pg_ctl start failed |
| tap |
[15:33:44.113](1.860s) Bail out! command "pg_ctl --pgdata /tmp/cirrus-ci-build/build/testrun/recovery/043_no_contrecord... |
| tap |
[15:33:52.002](0.244s) not ok 1 - Logical slot still valid |
| tap |
[15:37:25.725](207.570s) # poll_query_until timed out executing this query:
timed out waiting for catchup at /tmp/cirrus-ci-build/src/test/recovery/t/051_effective_wal_level.pl line 223. |
| tap |
[15:38:42.202](1.144s) Bail out! pg_ctl start failed |
| tap |
[15:38:43.263](1.153s) Bail out! pg_ctl start failed |
| tap |
[15:38:43.592](1.151s) Bail out! pg_ctl start failed |
| 57/6176 |
Batching in executor, part 1: add batch variant of table AM scan API |
|
FreeBSD - Meson |
| tap |
[15:49:50.231](0.000s) not ok 2 - regression tests pass |
| 57/6198 |
Change initdb default to the builtin collation provider |
|
Linux - Debian Trixie - Meson |
| tap |
[13:07:57.507](0.116s) not ok 23 - create database with provider "builtin" fails without --locale |
|
NetBSD - Meson |
| tap |
[13:06:13.839](0.056s) not ok 23 - create database with provider "builtin" fails without --locale
[13:06:14.315](0.071s) not ok 31 - create database with provider "builtin" not matching template |
|
Linux - Debian Trixie - Autoconf |
| tap |
[13:08:05.809](0.402s) not ok 23 - create database with provider "builtin" fails without --locale |
| 57/5958 |
Per backend relation statistics tracking |
|
FreeBSD - Meson |
| tap |
[01:44:56.505](216.452s) not ok 5 - regression tests pass |
| 57/6245 |
Idea to enhance pgbench by more modes to generate data (multi-TXNs, UNNEST, COPY BINARY) |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[08:42:47.633](0.061s) not ok 67 - client-side (binary): filler column of pgbench_branches has only NULL data
[08:42:47.728](0.094s) not ok 68 - client-side (binary): filler column of pgbench_tellers has only NULL data
[08:42:48.116](0.200s) not ok 71 - pgbench tpcb-like status (got 2 vs expected 0)
[08:42:48.118](0.000s) not ok 74 - pgbench tpcb-like stdout /(?^:processed: 10/10)/
[08:42:48.120](0.000s) not ok 77 - pgbench tpcb-like stderr /(?^:^$)/
[08:42:48.865](0.745s) not ok 78 - pgbench simple update status (got 2 vs expected 0)
[08:42:48.867](0.001s) not ok 82 - pgbench simple update stdout /(?^:processed: 100/100)/
[08:42:49.287](0.417s) not ok 85 - pgbench select only status (got 2 vs expected 0)
[08:42:49.288](0.000s) not ok 89 - pgbench select only stdout /(?^:processed: 700/700)/
[08:42:49.290](0.000s) not ok 94 - pgbench select only stderr /(?^:sending)/
[08:42:49.292](0.001s) not ok 95 - pgbench select only stderr /(?^:receiving)/
[08:43:07.315](0.305s) not ok 451 - pgbench throttling status (got 2 vs expected 0)
[08:43:07.316](0.000s) not ok 452 - pgbench throttling stdout /(?^:processed: 200/200)/
[08:43:07.317](0.000s) not ok 454 - pgbench throttling stderr /(?^:^$)/
[08:43:07.646](0.209s) not ok 460 - pgbench logs status (got 2 vs expected 0)
[08:43:07.647](0.000s) not ok 462 - pgbench logs stdout /(?^:processed: 100/100)/
[08:43:07.648](0.000s) not ok 463 - pgbench logs stderr /(?^:^$)/
[08:43:07.655](0.001s) not ok 466 - transaction count for C:\cirrus\build/testrun/pgbench/001_pgbench_with_server\data/t...
[08:43:07.784](0.128s) not ok 469 - pgbench logs contents status (got 2 vs expected 0)
[08:43:07.785](0.000s) not ok 471 - pgbench logs contents stdout /(?^:processed: 10/10)/
[08:43:07.788](0.001s) not ok 472 - pgbench logs contents stderr /(?^:^$)/
[08:43:07.795](0.001s) not ok 475 - transaction count for C:\cirrus\build/testrun/pgbench/001_pgbench_with_server\data/t... |
|
macOS - Sequoia - Meson |
| tap |
[08:37:53.165](0.026s) not ok 67 - client-side (binary): filler column of pgbench_branches has only NULL data
[08:37:53.199](0.034s) not ok 68 - client-side (binary): filler column of pgbench_tellers has only NULL data
[08:37:53.278](0.028s) not ok 71 - pgbench tpcb-like status (got 2 vs expected 0)
[08:37:53.278](0.000s) not ok 74 - pgbench tpcb-like stdout /(?^:processed: 10/10)/
[08:37:53.278](0.000s) not ok 77 - pgbench tpcb-like stderr /(?^:^$)/
[08:37:53.311](0.033s) not ok 78 - pgbench simple update status (got 2 vs expected 0)
[08:37:53.312](0.000s) not ok 82 - pgbench simple update stdout /(?^:processed: 100/100)/
[08:37:53.356](0.044s) not ok 85 - pgbench select only status (got 2 vs expected 0)
[08:37:53.357](0.000s) not ok 89 - pgbench select only stdout /(?^:processed: 700/700)/
[08:37:53.357](0.000s) not ok 94 - pgbench select only stderr /(?^:sending)/
[08:37:53.358](0.000s) not ok 95 - pgbench select only stderr /(?^:receiving)/
[08:37:56.632](0.038s) not ok 451 - pgbench throttling status (got 2 vs expected 0)
[08:37:56.632](0.000s) not ok 452 - pgbench throttling stdout /(?^:processed: 200/200)/
[08:37:56.633](0.000s) not ok 454 - pgbench throttling stderr /(?^:^$)/
[08:37:56.692](0.026s) not ok 460 - pgbench logs status (got 2 vs expected 0)
[08:37:56.692](0.000s) not ok 462 - pgbench logs stdout /(?^:processed: 100/100)/
[08:37:56.693](0.000s) not ok 463 - pgbench logs stderr /(?^:^$)/
[08:37:56.693](0.000s) not ok 466 - transaction count for /Users/admin/pgsql/build/testrun/pgbench/001_pgbench_with_serv...
[08:37:56.715](0.022s) not ok 469 - pgbench logs contents status (got 2 vs expected 0)
[08:37:56.716](0.000s) not ok 471 - pgbench logs contents stdout /(?^:processed: 10/10)/
[08:37:56.716](0.000s) not ok 472 - pgbench logs contents stderr /(?^:^$)/
[08:37:56.717](0.000s) not ok 475 - transaction count for /Users/admin/pgsql/build/testrun/pgbench/001_pgbench_with_serv... |
| 57/6317 |
Docs: Standardize "cannot" usage in SGML source |
|
NetBSD - Meson |
| tap |
[08:24:38.678](0.000s) not ok 2 - number: stderr has correct number of entries
[08:24:38.679](0.000s) not ok 4 - number, chunk size 5: no error output
[08:24:38.679](0.000s) not ok 6 - number, chunk size 4: no error output
[08:24:38.679](0.000s) not ok 8 - number, chunk size 3: no error output
[08:24:38.680](0.000s) not ok 10 - number, chunk size 2: no error output
[08:24:38.680](0.000s) not ok 12 - number, chunk size 1: no error output |
| 56/5522 |
Windows meson build |
|
FreeBSD - Meson |
| tap |
[19:48:43.704](0.001s) not ok 23 - connect : matches |
| 56/6162 |
ci: Skip minfree file in the cores_backtrace.sh |
|
NetBSD - Meson |
| tap |
[02:24:22.396](0.000s) not ok 4 - psql query died successfully after SIGKILL |
| 56/6195 |
Add uuid <-> base32hex conversion |
|
NetBSD - Meson |
| tap |
[18:16:12.342](0.000s) not ok 12 - psql query died successfully after SIGKILL |
| 56/5914 |
Document DSM Registry |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[17:17:15.707](0.370s) not ok 5 - psql connect success
[17:17:15.708](0.000s) not ok 6 - psql select 1 |
| 56/6079 |
Write Notifications Through WAL |
|
NetBSD - Meson |
| tap |
[16:29:03.992](0.001s) not ok 85 - bad token response: client authentication failure, provided description: matches |
| 56/5671 |
Produce LLVM bitcode files on meson builds |
|
NetBSD - Meson |
| tap |
[08:40:20.271](0.001s) not ok 21 - pg_archivecleanup dry run for 00000001000000370000000D: matches |
| 56/4984 |
Serverside SNI for SSL connections |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[18:36:53.623](0.001s) not ok 40 - host: 'example.org', ca: '': connect with sslcert, no client CA configured: matches
[18:36:53.694](0.001s) not ok 42 - host: 'example.com', ca: '': connect fails if no client certificate sent: matches
[18:36:53.838](0.001s) not ok 46 - host: 'example.net', ca: '': connect fails if no client certificate sent: matches
[18:36:53.910](0.001s) not ok 48 - host: 'example.net', ca: '': connect with sslcert, client certificate sent: matches
[18:36:54.259](0.001s) not ok 51 - host: 'example.org', ca: 'root+client_ca': connect with sslcert, no client CA configu...
[18:36:54.336](0.000s) not ok 53 - host: 'example.com', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:36:54.608](0.000s) not ok 57 - host: 'example.net', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:36:54.687](0.001s) not ok 59 - host: 'example.net', ca: 'root+client_ca': connect with sslcert, client certificate s...
[18:36:55.015](0.001s) not ok 62 - host: 'example.org', ca: 'root+server_ca': connect with sslcert, no client CA configu...
[18:36:55.075](0.001s) not ok 64 - host: 'example.com', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:36:55.216](0.001s) not ok 68 - host: 'example.net', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:36:55.281](0.001s) not ok 70 - host: 'example.net', ca: 'root+server_ca': connect with sslcert, client certificate s... |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[18:36:23.251](0.001s) not ok 40 - host: 'example.org', ca: '': connect with sslcert, no client CA configured: matches
[18:36:23.481](0.001s) not ok 42 - host: 'example.com', ca: '': connect fails if no client certificate sent: matches
[18:36:23.701](0.001s) not ok 46 - host: 'example.net', ca: '': connect fails if no client certificate sent: matches
[18:36:23.769](0.001s) not ok 48 - host: 'example.net', ca: '': connect with sslcert, client certificate sent: matches
[18:36:24.116](0.001s) not ok 51 - host: 'example.org', ca: 'root+client_ca': connect with sslcert, no client CA configu...
[18:36:24.225](0.001s) not ok 53 - host: 'example.com', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:36:24.445](0.001s) not ok 57 - host: 'example.net', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:36:24.570](0.001s) not ok 59 - host: 'example.net', ca: 'root+client_ca': connect with sslcert, client certificate s...
[18:36:24.962](0.001s) not ok 62 - host: 'example.org', ca: 'root+server_ca': connect with sslcert, no client CA configu...
[18:36:25.074](0.001s) not ok 64 - host: 'example.com', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:36:25.293](0.001s) not ok 68 - host: 'example.net', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:36:25.404](0.001s) not ok 70 - host: 'example.net', ca: 'root+server_ca': connect with sslcert, client certificate s... |
|
macOS - Sequoia - Meson |
| tap |
[18:28:30.633](0.000s) not ok 41 - host: 'example.org', ca: '': connect with sslcert, no client CA configured: matches
[18:28:30.658](0.000s) not ok 43 - host: 'example.com', ca: '': connect fails if no client certificate sent: matches
[18:28:30.719](0.000s) not ok 47 - host: 'example.net', ca: '': connect fails if no client certificate sent: matches
[18:28:30.747](0.000s) not ok 49 - host: 'example.net', ca: '': connect with sslcert, client certificate sent: matches
[18:28:31.005](0.000s) not ok 52 - host: 'example.org', ca: 'root+client_ca': connect with sslcert, no client CA configu...
[18:28:31.031](0.000s) not ok 54 - host: 'example.com', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:28:31.089](0.000s) not ok 58 - host: 'example.net', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:28:31.115](0.000s) not ok 60 - host: 'example.net', ca: 'root+client_ca': connect with sslcert, client certificate s...
[18:28:31.372](0.000s) not ok 63 - host: 'example.org', ca: 'root+server_ca': connect with sslcert, no client CA configu...
[18:28:31.400](0.000s) not ok 65 - host: 'example.com', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:28:31.458](0.000s) not ok 69 - host: 'example.net', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:28:31.484](0.000s) not ok 71 - host: 'example.net', ca: 'root+server_ca': connect with sslcert, client certificate s... |
|
Linux - Debian Trixie - Meson |
| tap |
[18:28:02.902](0.000s) not ok 41 - host: 'example.org', ca: '': connect with sslcert, no client CA configured: matches
[18:28:02.920](0.000s) not ok 43 - host: 'example.com', ca: '': connect fails if no client certificate sent: matches
[18:28:02.976](0.001s) not ok 47 - host: 'example.net', ca: '': connect fails if no client certificate sent: matches
[18:28:02.998](0.000s) not ok 49 - host: 'example.net', ca: '': connect with sslcert, client certificate sent: matches
[18:28:03.229](0.000s) not ok 52 - host: 'example.org', ca: 'root+client_ca': connect with sslcert, no client CA configu...
[18:28:03.249](0.002s) not ok 54 - host: 'example.com', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:28:03.302](0.000s) not ok 58 - host: 'example.net', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:28:03.321](0.001s) not ok 60 - host: 'example.net', ca: 'root+client_ca': connect with sslcert, client certificate s...
[18:28:03.545](0.000s) not ok 63 - host: 'example.org', ca: 'root+server_ca': connect with sslcert, no client CA configu...
[18:28:03.565](0.000s) not ok 65 - host: 'example.com', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:28:03.617](0.000s) not ok 69 - host: 'example.net', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:28:03.636](0.000s) not ok 71 - host: 'example.net', ca: 'root+server_ca': connect with sslcert, client certificate s... |
|
FreeBSD - Meson |
| tap |
[18:27:43.447](0.007s) not ok 41 - host: 'example.org', ca: '': connect with sslcert, no client CA configured: matches
[18:27:43.502](0.008s) not ok 43 - host: 'example.com', ca: '': connect fails if no client certificate sent: matches
[18:27:43.603](0.000s) not ok 47 - host: 'example.net', ca: '': connect fails if no client certificate sent: matches
[18:27:43.672](0.000s) not ok 49 - host: 'example.net', ca: '': connect with sslcert, client certificate sent: matches
[18:27:43.913](0.001s) not ok 52 - host: 'example.org', ca: 'root+client_ca': connect with sslcert, no client CA configu...
[18:27:43.941](0.001s) not ok 54 - host: 'example.com', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:27:44.006](0.001s) not ok 58 - host: 'example.net', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:27:44.033](0.001s) not ok 60 - host: 'example.net', ca: 'root+client_ca': connect with sslcert, client certificate s...
[18:27:44.315](0.001s) not ok 63 - host: 'example.org', ca: 'root+server_ca': connect with sslcert, no client CA configu...
[18:27:44.365](0.000s) not ok 65 - host: 'example.com', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:27:44.435](0.001s) not ok 69 - host: 'example.net', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:27:44.471](0.006s) not ok 71 - host: 'example.net', ca: 'root+server_ca': connect with sslcert, client certificate s... |
|
OpenBSD - Meson |
| tap |
[18:31:16.876](0.001s) not ok 41 - host: 'example.org', ca: '': connect with sslcert, no client CA configured: matches
[18:31:16.957](0.001s) not ok 43 - host: 'example.com', ca: '': connect fails if no client certificate sent: matches
[18:31:16.990](0.032s) not ok 44 - host: 'example.com', ca: '': connect with sslcert, client certificate sent
[18:31:16.991](0.001s) not ok 45 - host: 'example.com', ca: '': connect with sslcert, client certificate sent: no stderr
[18:31:17.138](0.001s) not ok 47 - host: 'example.net', ca: '': connect fails if no client certificate sent: matches
[18:31:17.193](0.004s) not ok 49 - host: 'example.net', ca: '': connect with sslcert, client certificate sent: matches
[18:31:17.657](0.001s) not ok 52 - host: 'example.org', ca: 'root+client_ca': connect with sslcert, no client CA configu...
[18:31:17.787](0.059s) not ok 54 - host: 'example.com', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:31:17.858](0.050s) not ok 55 - host: 'example.com', ca: 'root+client_ca': connect with sslcert, client certificate s...
[18:31:17.859](0.000s) not ok 56 - host: 'example.com', ca: 'root+client_ca': connect with sslcert, client certificate s...
[18:31:17.898](0.001s) not ok 58 - host: 'example.net', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:31:17.918](0.001s) not ok 60 - host: 'example.net', ca: 'root+client_ca': connect with sslcert, client certificate s...
[18:31:18.195](0.001s) not ok 63 - host: 'example.org', ca: 'root+server_ca': connect with sslcert, no client CA configu...
[18:31:18.240](0.001s) not ok 65 - host: 'example.com', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:31:18.309](0.068s) not ok 66 - host: 'example.com', ca: 'root+server_ca': connect with sslcert, client certificate s...
[18:31:18.312](0.000s) not ok 67 - host: 'example.com', ca: 'root+server_ca': connect with sslcert, client certificate s...
[18:31:18.354](0.004s) not ok 69 - host: 'example.net', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:31:18.378](0.001s) not ok 71 - host: 'example.net', ca: 'root+server_ca': connect with sslcert, client certificate s... |
|
Linux - Debian Trixie - Autoconf |
| tap |
[18:26:08.592](0.000s) not ok 41 - host: 'example.org', ca: '': connect with sslcert, no client CA configured: matches
[18:26:08.686](0.001s) not ok 43 - host: 'example.com', ca: '': connect fails if no client certificate sent: matches
[18:26:08.962](0.000s) not ok 47 - host: 'example.net', ca: '': connect fails if no client certificate sent: matches
[18:26:09.080](0.001s) not ok 49 - host: 'example.net', ca: '': connect with sslcert, client certificate sent: matches
[18:26:09.497](0.001s) not ok 52 - host: 'example.org', ca: 'root+client_ca': connect with sslcert, no client CA configu...
[18:26:09.589](0.000s) not ok 54 - host: 'example.com', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:26:09.809](0.001s) not ok 58 - host: 'example.net', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:26:09.871](0.001s) not ok 60 - host: 'example.net', ca: 'root+client_ca': connect with sslcert, client certificate s...
[18:26:10.291](0.001s) not ok 63 - host: 'example.org', ca: 'root+server_ca': connect with sslcert, no client CA configu...
[18:26:10.378](0.001s) not ok 65 - host: 'example.com', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:26:10.624](0.000s) not ok 69 - host: 'example.net', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:26:10.708](0.000s) not ok 71 - host: 'example.net', ca: 'root+server_ca': connect with sslcert, client certificate s... |
|
NetBSD - Meson |
| tap |
[18:25:47.726](0.000s) not ok 41 - host: 'example.org', ca: '': connect with sslcert, no client CA configured: matches
[18:25:47.751](0.002s) not ok 43 - host: 'example.com', ca: '': connect fails if no client certificate sent: matches
[18:25:47.839](0.001s) not ok 47 - host: 'example.net', ca: '': connect fails if no client certificate sent: matches
[18:25:47.918](0.000s) not ok 49 - host: 'example.net', ca: '': connect with sslcert, client certificate sent: matches
[18:25:48.162](0.000s) not ok 52 - host: 'example.org', ca: 'root+client_ca': connect with sslcert, no client CA configu...
[18:25:48.187](0.000s) not ok 54 - host: 'example.com', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:25:48.251](0.000s) not ok 58 - host: 'example.net', ca: 'root+client_ca': connect fails if no client certificate sen...
[18:25:48.277](0.000s) not ok 60 - host: 'example.net', ca: 'root+client_ca': connect with sslcert, client certificate s...
[18:25:48.519](0.000s) not ok 63 - host: 'example.org', ca: 'root+server_ca': connect with sslcert, no client CA configu...
[18:25:48.542](0.000s) not ok 65 - host: 'example.com', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:25:48.624](0.000s) not ok 69 - host: 'example.net', ca: 'root+server_ca': connect fails if no client certificate sen...
[18:25:48.648](0.001s) not ok 71 - host: 'example.net', ca: 'root+server_ca': connect with sslcert, client certificate s... |
| 56/5478 |
SQL/JSON json_table PLAN clause |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[16:34:34.699](68.323s) not ok 5 - regression tests pass |
| tap |
[16:37:27.942](71.387s) not ok 2 - regression tests pass |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[16:31:53.496](132.837s) not ok 5 - regression tests pass |
| tap |
[16:34:50.328](144.371s) not ok 2 - regression tests pass |
|
Linux - Debian Trixie - Meson |
| tap |
[16:32:43.699](77.806s) not ok 5 - regression tests pass |
| tap |
[16:34:15.299](91.196s) not ok 2 - regression tests pass |
|
macOS - Sequoia - Meson |
| tap |
[16:32:18.177](40.880s) not ok 5 - regression tests pass |
| tap |
[16:33:58.413](87.056s) not ok 2 - regression tests pass |
|
OpenBSD - Meson |
| tap |
[16:32:43.661](121.757s) not ok 5 - regression tests pass |
| tap |
[16:35:00.628](182.855s) not ok 2 - regression tests pass |
|
FreeBSD - Meson |
| tap |
[16:32:24.868](204.344s) not ok 5 - regression tests pass |
| tap |
[16:33:32.034](225.584s) not ok 2 - regression tests pass |
|
Linux - Debian Trixie - Autoconf |
| tap |
[16:36:19.710](144.393s) not ok 5 - regression tests pass |
| tap |
[16:37:51.711](91.583s) not ok 2 - regression tests pass |
|
NetBSD - Meson |
| tap |
[16:31:29.317](91.130s) not ok 5 - regression tests pass |
| tap |
[16:32:07.571](101.288s) not ok 2 - regression tests pass |
| 56/5690 |
Add os_page_num to pg_buffercache |
|
FreeBSD - Meson |
| tap |
[09:42:19.841](0.038s) not ok 5 - psql connect success
[09:42:19.842](0.000s) not ok 6 - psql select 1 |
| 56/5699 |
Adding error messages to a few slash commands |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[00:40:17.662](73.892s) not ok 5 - regression tests pass |
| tap |
[00:43:38.209](83.068s) not ok 2 - regression tests pass |
|
macOS - Sequoia - Meson |
| tap |
[00:37:20.507](39.827s) not ok 5 - regression tests pass |
| tap |
[00:38:42.248](72.770s) not ok 2 - regression tests pass |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[00:41:24.349](158.308s) not ok 5 - regression tests pass |
| tap |
[00:44:44.897](171.716s) not ok 2 - regression tests pass |
|
Linux - Debian Trixie - Meson |
| tap |
[00:39:06.304](87.532s) not ok 5 - regression tests pass |
| tap |
[00:40:44.142](101.106s) not ok 2 - regression tests pass |
|
Linux - Debian Trixie - Autoconf |
| tap |
[00:42:58.790](152.759s) not ok 5 - regression tests pass |
| tap |
[00:44:33.100](101.249s) not ok 2 - regression tests pass |
|
OpenBSD - Meson |
| tap |
[00:39:38.620](134.659s) not ok 5 - regression tests pass |
| tap |
[00:42:20.645](207.969s) not ok 2 - regression tests pass |
|
NetBSD - Meson |
| tap |
[00:38:22.336](101.007s) not ok 5 - regression tests pass |
| tap |
[00:39:07.303](114.377s) not ok 2 - regression tests pass |
|
FreeBSD - Meson |
| tap |
[00:41:47.318](253.546s) not ok 5 - regression tests pass |
| tap |
[00:43:01.102](278.004s) not ok 2 - regression tests pass |
| 56/6129 |
pg_createsubscriber --dry-run logging concerns |
|
Windows - Server 2022, MinGW64 - Meson |
| tap |
[10:07:10.207](0.002s) not ok 11 - pg_resetwal -n produces output: no stderr
[10:07:12.393](0.001s) not ok 74 - spot check that control changes were applied: no stderr |
| tap |
[10:00:41.457](0.000s) not ok 13 - invalid database causes failure stderr /(?^:^$)/ |
| tap |
[10:00:27.100](0.001s) not ok 2 - pg_upgrade with transfer mode --clone: stderr matches
[10:00:50.029](0.001s) not ok 16 - pg_upgrade with transfer mode --copy-file-range: stderr matches |
|
Windows - Server 2022, VS 2019 - Meson & ninja |
| tap |
[10:06:44.795](0.001s) not ok 11 - pg_resetwal -n produces output: no stderr
[10:06:50.696](0.001s) not ok 74 - spot check that control changes were applied: no stderr |
| tap |
[10:01:38.758](0.000s) not ok 13 - invalid database causes failure stderr /(?^:^$)/ |
| tap |
[09:59:35.400](0.001s) not ok 2 - pg_upgrade with transfer mode --clone: stderr matches
[10:00:42.419](0.001s) not ok 16 - pg_upgrade with transfer mode --copy-file-range: stderr matches |
|
macOS - Sequoia - Meson |
| tap |
[10:03:44.829](0.001s) not ok 11 - pg_resetwal -n produces output: no stderr
[10:03:46.572](0.001s) not ok 74 - spot check that control changes were applied: no stderr |
| tap |
[10:00:46.243](0.000s) not ok 13 - invalid database causes failure stderr /(?^:^$)/ |
| tap |
[10:00:03.560](0.004s) not ok 26 - pg_upgrade with transfer mode --copy-file-range: stderr matches |
|
Linux - Debian Trixie - Meson |
| tap |
[10:02:08.330](0.001s) not ok 11 - pg_resetwal -n produces output: no stderr
[10:02:09.450](0.000s) not ok 74 - spot check that control changes were applied: no stderr |
| tap |
[10:00:06.349](0.000s) not ok 13 - invalid database causes failure stderr /(?^:^$)/ |
| tap |
[09:58:48.217](0.000s) not ok 2 - pg_upgrade with transfer mode --clone: stderr matches |
|
FreeBSD - Meson |
| tap |
[10:01:27.435](0.001s) not ok 11 - pg_resetwal -n produces output: no stderr
[10:01:28.429](0.003s) not ok 74 - spot check that control changes were applied: no stderr |
| tap |
[10:01:32.158](0.000s) not ok 13 - invalid database causes failure stderr /(?^:^$)/ |
| tap |
[09:57:58.286](0.002s) not ok 2 - pg_upgrade with transfer mode --clone: stderr matches |
|
OpenBSD - Meson |
| tap |
[10:02:51.291](0.001s) not ok 11 - pg_resetwal -n produces output: no stderr
[10:02:52.514](0.001s) not ok 74 - spot check that control changes were applied: no stderr |
| tap |
[10:01:10.324](0.000s) not ok 13 - invalid database causes failure stderr /(?^:^$)/ |
| tap |
[09:58:51.911](0.030s) not ok 2 - pg_upgrade with transfer mode --clone: stderr matches
[09:59:23.386](0.001s) not ok 16 - pg_upgrade with transfer mode --copy-file-range: stderr matches |
|
Linux - Debian Trixie - Autoconf |
| tap |
[10:01:30.954](0.001s) not ok 11 - pg_resetwal -n produces output: no stderr
[10:01:32.819](0.001s) not ok 74 - spot check that control changes were applied: no stderr |
|
NetBSD - Meson |
| tap |
[10:00:31.475](0.001s) not ok 11 - pg_resetwal -n produces output: no stderr
[10:00:32.286](0.000s) not ok 74 - spot check that control changes were applied: no stderr |
| tap |
[10:00:21.312](0.000s) not ok 13 - invalid database causes failure stderr /(?^:^$)/ |
| tap |
[09:58:30.483](0.001s) not ok 2 - pg_upgrade with transfer mode --clone: stderr matches
[09:58:41.244](0.001s) not ok 16 - pg_upgrade with transfer mode --copy-file-range: stderr matches |
| 56/6149 |
A tidyup for match_orclause_to_indexcol() |
|
NetBSD - Meson |
| tap |
[17:46:06.925](0.000s) not ok 844 - unknown escape sequence: stderr has correct number of entries
[17:46:06.926](0.000s) not ok 846 - unknown escape sequence, chunk size 14: correct error output
[17:46:06.926](0.000s) not ok 848 - unknown escape sequence, chunk size 13: correct error output
[17:46:06.927](0.000s) not ok 850 - unknown escape sequence, chunk size 12: correct error output
[17:46:06.928](0.000s) not ok 852 - unknown escape sequence, chunk size 11: correct error output
[17:46:06.929](0.000s) not ok 854 - unknown escape sequence, chunk size 10: correct error output
[17:46:06.929](0.000s) not ok 856 - unknown escape sequence, chunk size 9: correct error output
[17:46:06.930](0.000s) not ok 858 - unknown escape sequence, chunk size 8: correct error output
[17:46:06.930](0.000s) not ok 860 - unknown escape sequence, chunk size 7: correct error output
[17:46:06.931](0.000s) not ok 862 - unknown escape sequence, chunk size 6: correct error output
[17:46:06.932](0.000s) not ok 864 - unknown escape sequence, chunk size 5: correct error output
[17:46:06.932](0.000s) not ok 866 - unknown escape sequence, chunk size 4: correct error output
[17:46:06.933](0.000s) not ok 868 - unknown escape sequence, chunk size 3: correct error output
[17:46:06.933](0.000s) not ok 870 - unknown escape sequence, chunk size 2: correct error output
[17:46:06.934](0.000s) not ok 872 - unknown escape sequence, chunk size 1: correct error output |
| 56/6022 |
Use streaming read I/O in BRIN vacuuming |
|
NetBSD - Meson |
| tap |
[14:11:04.966](86.774s) not ok 5 - regression tests pass |
| 57/6213 |
remove obsolete autovacuum comment |
|
NetBSD - Meson |
| tap |
[21:15:05.615](0.000s) not ok 1496 - missing comma: stderr has correct number of entries
[21:15:05.618](0.000s) not ok 1498 - missing comma, chunk size 20: correct error output
[21:15:05.619](0.000s) not ok 1500 - missing comma, chunk size 19: correct error output
[21:15:05.619](0.000s) not ok 1502 - missing comma, chunk size 18: correct error output
[21:15:05.620](0.000s) not ok 1504 - missing comma, chunk size 17: correct error output
[21:15:05.621](0.000s) not ok 1506 - missing comma, chunk size 16: correct error output
[21:15:05.621](0.000s) not ok 1508 - missing comma, chunk size 15: correct error output
[21:15:05.622](0.000s) not ok 1510 - missing comma, chunk size 14: correct error output
[21:15:05.622](0.000s) not ok 1512 - missing comma, chunk size 13: correct error output
[21:15:05.623](0.000s) not ok 1514 - missing comma, chunk size 12: correct error output
[21:15:05.623](0.000s) not ok 1516 - missing comma, chunk size 11: correct error output
[21:15:05.624](0.000s) not ok 1518 - missing comma, chunk size 10: correct error output
[21:15:05.625](0.000s) not ok 1520 - missing comma, chunk size 9: correct error output
[21:15:05.625](0.000s) not ok 1522 - missing comma, chunk size 8: correct error output
[21:15:05.626](0.000s) not ok 1524 - missing comma, chunk size 7: correct error output
[21:15:05.626](0.000s) not ok 1526 - missing comma, chunk size 6: correct error output
[21:15:05.627](0.000s) not ok 1528 - missing comma, chunk size 5: correct error output
[21:15:05.627](0.000s) not ok 1530 - missing comma, chunk size 4: correct error output
[21:15:05.628](0.000s) not ok 1532 - missing comma, chunk size 3: correct error output
[21:15:05.628](0.000s) not ok 1534 - missing comma, chunk size 2: correct error output
[21:15:05.629](0.000s) not ok 1536 - missing comma, chunk size 1: correct error output |
| 56/6063 |
DOCS: What SGML markup to use for user objects like tables, columns, etc? |
|
NetBSD - Meson |
| tap |
[03:17:23.047](231.871s) # poll_query_until timed out executing this query: |
| 56/6026 |
Fix a bug where ALTER SYSTEM SET with empty strings for GUC_LIST_QUOTE parameters (like shared_preload_libraries) results in malformed configuration entries that cause server crashes on restart. |
|
NetBSD - Meson |
| tap |
[23:00:46.808](0.001s) not ok 149 - backup target and format: matches |
| 56/6142 |
Fix POSIX compliance in pgwin32_unsetenv() |
|
Windows - Server 2019, VS 2019 - Meson & ninja |
| tap |
[21:06:29.570](0.001s) not ok 13 - reindexdb cannot target invalid database: matches |
| 56/5956 |
Enhance statistics reset functions to return reset timestamp |
|
Windows - Server 2019, VS 2019 - Meson & ninja |
| tap |
[04:17:23.524](613.920s) # poll_query_until timed out executing this query:
timed out waiting for catchup at C:/cirrus/src/test/recovery/t/001_stream_rep.pl line 72. |
| 56/6104 |
Remove Item type |
|
NetBSD - Meson |
| tap |
[16:19:31.332](0.000s) not ok 1496 - missing comma: stderr has correct number of entries
[16:19:31.334](0.001s) not ok 1498 - missing comma, chunk size 20: correct error output
[16:19:31.335](0.000s) not ok 1500 - missing comma, chunk size 19: correct error output
[16:19:31.336](0.000s) not ok 1502 - missing comma, chunk size 18: correct error output
[16:19:31.337](0.000s) not ok 1504 - missing comma, chunk size 17: correct error output
[16:19:31.338](0.000s) not ok 1506 - missing comma, chunk size 16: correct error output
[16:19:31.339](0.000s) not ok 1508 - missing comma, chunk size 15: correct error output
[16:19:31.339](0.000s) not ok 1510 - missing comma, chunk size 14: correct error output
[16:19:31.340](0.000s) not ok 1512 - missing comma, chunk size 13: correct error output
[16:19:31.340](0.000s) not ok 1514 - missing comma, chunk size 12: correct error output
[16:19:31.341](0.000s) not ok 1516 - missing comma, chunk size 11: correct error output
[16:19:31.349](0.008s) not ok 1518 - missing comma, chunk size 10: correct error output
[16:19:31.350](0.000s) not ok 1520 - missing comma, chunk size 9: correct error output
[16:19:31.351](0.000s) not ok 1522 - missing comma, chunk size 8: correct error output
[16:19:31.351](0.000s) not ok 1524 - missing comma, chunk size 7: correct error output
[16:19:31.352](0.000s) not ok 1526 - missing comma, chunk size 6: correct error output
[16:19:31.352](0.000s) not ok 1528 - missing comma, chunk size 5: correct error output
[16:19:31.353](0.000s) not ok 1530 - missing comma, chunk size 4: correct error output
[16:19:31.353](0.000s) not ok 1532 - missing comma, chunk size 3: correct error output
[16:19:31.353](0.000s) not ok 1534 - missing comma, chunk size 2: correct error output
[16:19:31.354](0.000s) not ok 1536 - missing comma, chunk size 1: correct error output |
| 56/5397 |
revamp row-security tracking |
|
Windows - Server 2019, VS 2019 - Meson & ninja |
| tap |
[22:33:09.425](0.001s) not ok 2 - connecting to a non-existent database: matches |
| 56/6139 |
Invalid primary_slot_name triggers warnings in all processes on reload |
|
NetBSD - Meson |
| tap |
[14:18:26.555](0.001s) not ok 2210 - interrupted escapes: stderr has correct number of entries
[14:18:26.585](0.000s) not ok 2228 - interrupted escapes, chunk size 6: no error output
[14:18:26.586](0.000s) not ok 2230 - interrupted escapes, chunk size 5: no error output
[14:18:26.587](0.000s) not ok 2232 - interrupted escapes, chunk size 4: no error output
[14:18:26.587](0.000s) not ok 2234 - interrupted escapes, chunk size 3: no error output
[14:18:26.588](0.000s) not ok 2236 - interrupted escapes, chunk size 2: no error output
[14:18:26.588](0.000s) not ok 2238 - interrupted escapes, chunk size 1: no error output |